SEMI CONDUCTING TAPE
1. Normal Thickness (mm)
0.125 ± 0.02
0.2 ± 0.02
0.25 ± 0.025
2. Breaking Load (kg/cm)
5.0
8.0
8.0
3. Ultimate Elongation (% min )
15
15
15
4. Volume Resistivity (ohms/cm) max
2000
2000
2000
5. Surface Resistance (ohms per sq)
200-1500
200-1500
200-1500
6. Substance (gms/mtr2)
100-130
160-200
220-250
7. Normal Width (mm)
15 - 200
15 - 200
15 - 200
8. Normal Length (mts)
50-300
50-500
50-500
APPLICATION : For corona discharge and shielding in high voltage and high frequency cables and stress grading of high voltage current transformer. Used for EMI/RF shielding of Telephone cable. The particles of coating of semi conducting tape do not migrate to the oil when coil is immersed in it.ABOVE INFORMATION IS BASED ON OUR PRESENT STATE OF KNOWLEDGE AND IS INTENDED TO PROVIDE GENERAL NOTES ON OUR PRODUCTS AND THEIR USES IT SHOULD NOT THEREFORE , BE CONSTRUED AS GURANTEEING SPECIFIC PROPERTIES OF THE PRODUCTS DESCRIBED OR THEIR SUITABILITIES FOR A PARTICULAR APPLICATION .YOU SHOULD THOROUGHLY AND INDEPENDENTLY TEST MATERIAL FOR ANY PLANNED APPLICATION.
