POLYIMIDE KAPTON* ADHESIVE TAPE (POLYAD)

MATERIAL

POLYAD tape has Polyimide Film backing coated with silicone adhesive

TEST	I	II
THICKNESS (mm)	0.06 ± 0.01	0.085 ± 0.01
BACKING THICKNESS (mm) nominal	0.025	0.05
WIDTH (mm)	± 0.5	± 0.5
BREAKING LOAD (KG/ CM)	4.5	9
BDV (KV)	5	10
ELONGATION %	50 MIN	50 MIN
ADHESIVE STRENGTH GMS/CM	200	200
CLASS OF INSULATION	200	200
ADHESIVE	SILICONE	SILICONE
TEST METHOD	IEC 60454:2

* Kapton is registered trade mark of Dupont USA. 

APPLICATION
Suitable for splicing in very high temp and high stress conditions like high voltage motors, traction motors.It is also used for masking purpose.

ABOVE INFORMATION IS BASED ON OUR PRESENT STATE OF KNOWLEDGE AND IS INTENDED TO PROVIDE GENERAL NOTES ON OUR PRODUCTS AND THEIR USES IT SHOULD NOT THEREFORE , BE CONSTRUED AS GURANTEEING SPECIFIC PROPERTIES OF THE PRODUCTS DESCRIBED OR THEIR SUITABILITIES FOR A PARTICULAR APPLICATION .YOU SHOULD THOROUGHLY AND INDEPENDENTLY TEST MATERIAL FOR ANY PLANNED APPLICATION.

BACK