electricinsulations.com (Products)

MAIN CHARACTERISTICS

1. Easy filling with powder or paste.
2. Strong structure.
3. Low electrical resistance.
4. High porosity.
5. High mechanical strength.
6. Very high resistance to the electrochemical oxidation.
7. The uniform outside surface allows an easier cleaning after filling of the powder.
8. Available in different tube profiles like circular, elliptical square and rectangular.

SPECIFICATIONS

Semirigid Pluritubular Bag Gauntlet obtained from 100% man-made fabric of typical weave, from High Tenacity.
The fabric is impregnated with a specially formulated resin.

Wall thickness (finished tube) :	0.30mm
Weight per linear meter of single tubing :	6.6gapox
Weight per square metre of standard bad :	700g/sqmt
Electrical resistance :	0.30ohmcm
Tube bursting strength :	36 Bars
Weight loss after 3 hours (Acid resistance) :	< 0.5%
Impurity release after 3 hours reflux-chlorine:	Nil

DIMENSIONS

1 Standard internal diameters :	6.00 mm.
( Tolerance : - 0.0 mm :	7.24 mm.
+ 0.1 mm ) :	8.00 mm.
	8.40 mm.
	10.00 mm.
2 Width ( tolerance : ± 2.0 % )	As Req.
3 Tube pitch ( tolerance : ± 2.0 % )	"
4 Number of tubes :	Unlimited
5 Maximum height of bag(tolerance : ± 0.5mm) :	960mm.
6 Lateral finish :	T,C,IS,IS

ABOVE INFORMATION IS BASED ON OUR PRESENT STATE OF KNOWLEDGE AND IS INTENDED TO PROVIDE GENERAL NOTES ON OUR PRODUCTS AND THEIR USES IT SHOULD NOT THEREFORE , BE CONSTRUED AS GURANTEEING SPECIFIC PROPERTIES OF THE PRODUCTS DESCRIBED OR THEIR SUITABILITIES FOR A PARTICULAR APPLICATION .YOU SHOULD THOROUGHLY AND INDEPENDENTLY TEST MATERIAL FOR ANY PLANNED APPLICATION.