FINISHING VARNISH FV 5450
FV 5450 is a Silicone based Anti tracking finishing Varnish of thermal class H .It dries tackfree at room temperature. However it should be cured at high temperature to develop best results.
FV 5450 contains specially selected heat resistant red pigment .It provides excellent moisture resistance and track resistance and resistance to organic chemicals.
FV 5450 is recommended as finishing varnish for Traction Motors , Large Electric Machine and Turbo Generators.
COLOUR
RED SOLID CONTENT
50 % ± 3 SURFACE DRYING (0.05 MM,AT RT) 2 HRS (TACK FREE) CURING CYCLE 100 C 2HRS FOLLOWED BY 170 C 16 Hrs.
VISCOSITY ( Ford B 4 Cup at 25o C)
40 - 90 SEC VOLUME RESISTIVITY 1013 OHM.CM DILECTRIC STRENGTH AT RT 50Volts/micron
SHELF LIFE
6 MONTHS at 25o C OR BELOW
TYPE
SILICONE THERMAL CLASS NEARLY H
CTI = 220 VOLTS TEST METHOD 60464:2 ABOVE INFORMATION IS BASED ON OUR PRESENT STATE OF KNOWLEDGE AND IS INTENDED TO PROVIDE GENERAL NOTES ON OUR PRODUCTS AND THEIR USES IT SHOULD NOT THEREFORE , BE CONSTRUED AS GURANTEEING SPECIFIC PROPERTIES OF THE PRODUCTS DESCRIBED OR THEIR SUITABILITIES FOR A PARTICULAR APPLICATION .YOU SHOULD THOROUGHLY AND INDEPENDENTLY TEST MATERIAL FOR ANY PLANNED APPLICATION.
