CONDUCTING FLEECE TAPE
MATERIAL
Conducting fleece tape is made from random oriented Polyester fleece. It is impregnated with heat resistant conducting varnish. The tape is highly resistant to most of the organic and inorganic solvents and can be impregnated with synthetic resin.PROPERTIES
Base Material
Polyester
Polyester
Polyester
Thickness (Finished)
0.12 ± 0.02mm
0.10 ± 0.02mm
0.08mm ± 0.02
Weight
110gsm ± 20gsm
95 ± 15 gsm
80 ±10 gsm
Tensile Strength
40N/cm min.
40N/cm min
30N/cm min
Elongation
10% min
10% min
10% min
Surface Resistivity
100-1000 Ohms □
100-800 Ohms □
100-800 Ohms □
Thermal Class
Class F (appox)
Class F (appox)
Class F (appox)
Resistance to Transformer Oil
Very good.
Very good
Very good
AVAILABILITY
Tape is available in width of 15mm, 20mm, 25mm and 30mm and roll length of 50mtrs. Higher width and roll length can be made available on request.
APPLICATION
Conducting fleece tape is used for corona protection in the slots of high voltage electrical machine. Conducting fleece tape is suitable for both resin rich and resin poor system. The coating on conducting fleece tape is not diffused with the main slot insulation, during the consolidation of coils. The particles of coating do not migrate to the epoxy resin bath when tape is immersed in VPI system.
ABOVE INFORMATION IS BASED ON OUR PRESENT STATE OF KNOWLEDGE AND IS INTENDED TO PROVIDE GENERAL NOTES ON OUR PRODUCTS AND THEIR USES IT SHOULD NOT THEREFORE , BE CONSTRUED AS GURANTEEING SPECIFIC PROPERTIES OF THE PRODUCTS DESCRIBED OR THEIR SUITABILITIES FOR A PARTICULAR APPLICATION .YOU SHOULD THOROUGHLY AND INDEPENDENTLY TEST MATERIAL FOR ANY PLANNED APPLICATION.
